China dispensing valve manufacturer & supplier

Liquid Pressure Dispensing Valve

FU-H3242AB1

Overall Dimensions(mm):Square 32*42 115 Long
Weight:618g
Applied Material: AB mixed adhesive 1:1, with all kinds of mixing pipe

2013-06-07

Liquid Control Adhesive Dispensing Valves

FU-H1919AB

Overall Dimensions(mm):￠19 Width 40 Long 160
Weight:233 g
Applied Material:AB mixed adhesive,Under 2:1 Adjustable proportion

2013-06-07

Manual Needle Off Glue Valve

FU-2020

Wet Body Material:AL
Overall Dimensions(mm):(D)20(L)150
Weight(g):175

2013-06-07

Needle Off Dispensing Valve

FU-2030

Material Inlet Outlet Size:6mm
Overall Dimensions(mm):(D)18(L)150
Weight(g):150

2013-06-07

Silicone Dispensing Control Valve

FU-D30

Material Input Pressure:<10Kg
Material Inlet Outlet Size:1/8'' t(f)
Operating Cycle:<600/min

2013-06-07

Stainless Steel Liquid Control Valve

FU-D18

Overall Dimensions(mm):Round ￠18 Long120
Weight:93g
Applied Material: (Good fluidity,Medium Viscosity )
Grease,Bond,Alcohol,Ink,UV Glue,Paint

2013-06-07

Double Acting Dispensing Valve

FU-D2121

Overall Dimensions(mm):21*21 Long130
Weight:188g
Applied Material: (Good fluidity,Medium Viscosity )
Grease,Bond,Alcohol,Ink,UV Glue,Paint, Oil

2013-06-07

Glue Dispensing Control Valves

FU-2030

Flow Adjustment:Available
Operating Air Source:0.4-0.7Mpa
Min.Shot Volume:0.01ml

2013-06-07

Glue Dispensing Control Valve

FU-D3075

Type of Operation:A
Flow Adjustment:Available
Operating Air Source:0.4-0.7Mpa

2013-06-07

Fluid Dispensing Control Valve

FU-Z30

Body Material:Sus 304 Stainless Steel
Material Input Pressure:<10Kg
Material Inlet Outlet Size:1/8'' t(f)

2013-06-07

Silicone Dispesing Control Valve

FU-H3030

Type of Operation:A
Flow Adjustment:Available
Operating Air Source:0.4-0.7Mpa
Min.Shot Volume:0.01ml
Operation Viscositi:1-1.000.000cps

2013-06-07

Liquid Glue Dispensing Control Valve

FU-G25

Operating Air Source:0.4-0.7Mpa
Min.Shot Volume:0.01ml
Operation Viscositi:1-1.000.000cps

2013-06-07

UV Adhesive Dispensing Valve

FU-D1616

Control Type:Double Acting
Type of Operation:A
Flow Adjustment:Unavailable
Operating Air Source:0.4-0.7Mpa

2013-06-07

Syringe Part Dispensing Accessories

TE9J

Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing

2013-06-07

Liquid Adhesive Dispensing Accessory

TE9E

Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing.

2013-06-07

Adhesive Syringe Dispensing Accessory

TE3J

Re-usable end caps for sealing the top of the syringe barrel in sizes 3cc, 5cc, 10cc, 30cc and 55cc. Polyethylene Polyethylene for an air tight seal p

2013-06-07